Model: LUD_200LLC

Diamond Tools

This all new model is fully self-tuning which means once you have properly attached the tool you just turn it on and adjust the power for the material you are machining.

This ultrasonic drill is designed to drill .5mm-6.0mm holes, engrave ( with a solid die) up to 10m, and cut  hard brittle materials by use of ultrasonic energy.  It is effective in precious stone, semi-precious stone, ferrite, silicon, glass, and ceramics.  This is done by the solid state transducer transforming A/C current into mechanical vibration of about 20 KHz per second.  The abrasive of 220 graded silicon carbide grit is fed onto the tool and workpiece to receive the impacts from the tool and grind the workpiece to form a hole of the same shape as the tool.

The cutting is fast and clean.  This usually out performs all diamond drilling tools.  And best of all the usage items are far less costly.  For example a diamond plated drill usually costs from $.75 to $2.00 each and will last form 1/2 hole to 2-3 holes max.  The drill tube for the ultrasonic costs from $.06 to $.10 each and lasts for 10-20 holes in agate and 50-100 holes in glass.  For example a 1.0mm hole in an agate slab of 4.0mm thick will take about 60 seconds.  In glass it is about 15 seconds.

I have been the international factory representative for this manufacturer for over 20 years and they have been producing quality lapidary equipment for over three decades.  These are not "hobby" machines but full fledged production equipment.  They have been sold all over the world to production shops.

For drop ship to most countries the is the SAME !!!

To order or ask questions - Contact:

Cutting Edge Solutions

22704 Ventura Blvd. # 366

Woodland Hills, CA 91364

PH: 818-992-1987  -  Fax: 818-992-3488


This machine comes with 5 horns, propane torch, flux, silver solder, tools, spare fuses, approx. 2Kg of 220 graded silicon carbide grit, a simple drip set-up ( but a full recirculating pump is recommended).  In addition you will receive 10 meters ( 25 tubes per meter) of the sizes  of your choice.  The tubes come in .5mm, .8mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, and 5.0mm.  Additional quantities of tube are available for purchase.  The tube costs rang from $1.50 per meter to $5.50 per meter.  Additional horns are $25.00 each.


  • Shipping Weight: approx. 20 Kg ( 44 lbs)

  • Size 14"D X 12" W plus grit tray and recirculating system

  • Power: 120V and 220V AC . 50/60 Hz

  • Frequency: 20 KHz.